Doorgaan naar inhoud
BLACK FRIDAY
BLACK FRIDAY
Full custom | Helix

Full custom | Helix

Bespaar 12%
€1.199,00
€1.050,00

Gratis verzending (vanaf €100,-)!
30 dagen bedenktijd
Advies van experts

Laat het me weten als het weer op voorraad is

Ons full-custom programma maakt gebruik van fietsspecifieke voetafgietsels die u naar ons opstuurd (of die wij op afspraak voor u maken indien mogelijk) om een paar schoenen te bouwen die precies om de vorm van uw voeten zijn gebouwd.

De nieuwe gouden standaard in de performance wereld. Der Helix Helix kenmerkt onze race-bewezen anatomische vorm met een vernieuwd BOA sluitingssysteem.

Je denkt dat je nu dicht op de pedalen staat? De Bont Cycling Helix brengt je nog dichterbij. Ervaar performance en comfort als nooit tevoren.

Waarom je waarschijnlijk een paar full-custom schoenen nodig hebt:

  • Eén voet is langer dan de andere.
  • Breede voeten.
  • Onregelmatige voeten.
  • Je hebt last van hamer- en/of klauwtenen.
  • Verschil tussen linker en rechter voet.
  • Je hebt graag je eigen ontwerp.

Wat je kunt customizen:

  • Kleuren en ontwerp
  • Naam opgeborduurd
  • BOA kleuren

2 manieren om je full-custom paar te krijgen:

  • Plaats een bestelling en ons team zal contact met u opnemen om de specifieke benodigdheden te bespreken en de afmetingen te overleggen.
  • Neem contact op voor vragen en benodigdheden om de procedure van het customizen in gang te zetten.

Advantages:

  • Pijnvrij fietsen: je hebt geen last meer van irritaties tijdens het fietsen.
  • Sta dichter op de pedalen: je voeten zullen veel dichter op je pedalen staan, wat je resultaten aanzienlijk zal verbeteren.
  • Efficiënt trappen: de energie wordt over je hele voet verdeelt.
  • Extreem lichte schoenen: bovenwerk van Durolite en voering van suède leer.
  • 100% gepersonaliseerd: je krijgt op maat gemaakte schoenen die volledig rond je voeten zijn gevormd.

  • Weight: 230gr (size 42)
  • 100% carbon fiber construction utilising hand-laid unidirectional carbon from Toray of Japan and Bont Cycling’s proprietary heat molding technology.
  • Industry-leading 3.6mm stack height (sole thickness) for a closer connection to the pedal, more rounded pedal strokes, improved stability and injury prevention.
  • Durolite upper supported by an embedded anti-stretch fabric for a consistent fit across the lifetime of the shoes.
  • Comfortable faux suede liner with lightweight padding.
  • Frontal Air Vents for breathability in all-weather conditions.
  • Innersole: EVA thermo-moldable with built-in inner padding.
  • Sole Replaceable heel and toe guards.
  • 316 marine grade stainless steel hardware for improved removal and replacement of cleat t-nuts and heel pads.
  • Cleat Mounting: standard 3-hole road pedal configuration with alignment grid and grip. Also available with 4-hole Speedplay sole on request.
  • Semi and Full Custom available through custom programm.
  • BOA Li2 dial with  The Boa Guarantee, for the life of your shoes.

  • After placing the order or contacting us regarding your semi-custom request, a Bont specialist from the Reins.cc team will contact you.
    Production lead times are currently 8-9 weeks following confirmation of selections. Please allow additional time for delivery to your chosen address.
    Reins.cc prioritizes DPD for shipping across Europe. Although it may use a local carrier if appropriate.
    We provide a track & trace number for you.

First of all, you do not need to mold your shoes if they fit you straight out of the box!
This cycling shoe is the most heat moldable shoe on the market today. Bont’s resin is developed in house and has been perfected over 36 years to be an extremely stiff resin that becomes pliable at relatively low temperatures. The base of the shoe is moldable which means all stiff areas of the shoe can be molded in a standard oven. To mold your shoes, remove any cleats, laces or cleat mounting screws and innersole before molding. Failure to remove the innersole can result in it becoming deformed by the heat. Pre heat the oven to 70°C. Place the shoe in the oven for 20 minutes. Higher temperatures will void your warranty and may damage your boot. Caution: Do not place your feet in the hot shoes or you may burn your feet. Let them cool a little and test the shoe temperature with your hand before placing your feet in the shoes. Tighten the straps and allow to cool. If you have any lumps or bunions on your feet or if there are any areas causing discomfort, while the shoe is hot you can use the round end of a screwdriver to press out any part of the boot. You can heat mold the shoes as many times as you like.

  • Weight: 230gr (size 42)
  • 100% carbon fiber construction utilising hand-laid unidirectional carbon from Toray of Japan and Bont Cycling’s proprietary heat molding technology.
  • Industry-leading 3.6mm stack height (sole thickness) for a closer connection to the pedal, more rounded pedal strokes, improved stability and injury prevention.
  • Durolite upper supported by an embedded anti-stretch fabric for a consistent fit across the lifetime of the shoes.
  • Comfortable faux suede liner with lightweight padding.
  • Frontal Air Vents for breathability in all-weather conditions.
  • Innersole: EVA thermo-moldable with built-in inner padding.
  • Sole Replaceable heel and toe guards.
  • 316 marine grade stainless steel hardware for improved removal and replacement of cleat t-nuts and heel pads.
  • Cleat Mounting: standard 3-hole road pedal configuration with alignment grid and grip. Also available with 4-hole Speedplay sole on request.
  • Semi and Full Custom available through custom programm.
  • BOA Li2 dial with  The Boa Guarantee, for the life of your shoes.

  • After placing the order or contacting us regarding your semi-custom request, a Bont specialist from the Reins.cc team will contact you.
    Production lead times are currently 8-9 weeks following confirmation of selections. Please allow additional time for delivery to your chosen address.
    Reins.cc prioritizes DPD for shipping across Europe. Although it may use a local carrier if appropriate.
    We provide a track & trace number for you.

First of all, you do not need to mold your shoes if they fit you straight out of the box!
This cycling shoe is the most heat moldable shoe on the market today. Bont’s resin is developed in house and has been perfected over 36 years to be an extremely stiff resin that becomes pliable at relatively low temperatures. The base of the shoe is moldable which means all stiff areas of the shoe can be molded in a standard oven. To mold your shoes, remove any cleats, laces or cleat mounting screws and innersole before molding. Failure to remove the innersole can result in it becoming deformed by the heat. Pre heat the oven to 70°C. Place the shoe in the oven for 20 minutes. Higher temperatures will void your warranty and may damage your boot. Caution: Do not place your feet in the hot shoes or you may burn your feet. Let them cool a little and test the shoe temperature with your hand before placing your feet in the shoes. Tighten the straps and allow to cool. If you have any lumps or bunions on your feet or if there are any areas causing discomfort, while the shoe is hot you can use the round end of a screwdriver to press out any part of the boot. You can heat mold the shoes as many times as you like.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Onze winkel

Niet om de hoek? Wij brengen de fysieke winkel-ervaring online!