Skip to content
€100 = FREE SHIPPING
€100 = FREE SHIPPING
Riot TR+ Black

Riot TR+ Black

€159,00

Free Shipping (from €100,-)!
30 days consideration time
Advice frome experts

Notify me when back in stock

The world's only carbon composite and heat-moldable triathlon shoe available at a competitive price point.

The Riot TR+ combines Bont Cycling's professional-level technical features including anatomical power transfer platform and last shaping based on more than 20,000 foot scans for greater efficiency and injury prevention due to incorrect knee tracking and pedal stroke.

This shoe utilises a triathlon-specific Velcro retention system for easy entry in and out of the shoe during transitions. The result? The most technically advanced entry-level triathlon shoe available on the market.

Advantages:

  • Cycling without pain: you will be able to fully focus on performing.
  • Fast transitions during triathlon: triathlon-specific Velcro retention system.
  • All energy in one carbon chassis: this shoe is made out of one entire carbon chassis, which devides the energy all over your feet.
  • Greater efficiency and injury prevention: chassis shaping based on more than 20,000 foot scans.
  • Fully heat moldable: if needed, you can customise your fit by heat molding your shoe.

  • Carbon Composite Construction with Microfiber Upper.
  • Stack height: 4.8mm.
  • Air Vents: ventilations holes through upper and mesh inserts.
  • Innersole: EVA thermo-moldable
  • Sole Guards: replaceable.
  • Padding: memory foam.
  • Fit customisation: fully heat moldable chassis.
  • Cleat Mounting: 3 Hole Look Configuration.
  • Closure System: independent Double Velcro Closure.
  • Weight: 230 grams.

  • Ordered before 15:00? We ship from the Netherlands TODAY.
  • Delivery time between 1-7 working days. 
  • Over €100? We ship throughout whole Europe for FREE. 
  • We provide you with tracking service. 
  • Consideration time is 30 days. We just send you the money back. 

To choose the right size, please go to the Choose your size page.

You have irregular feet? Try and have a look at the Custom Made Page.

First of all, you do not need to mold your shoes if they fit you straight out of the box!
This cycling shoe is the most heat moldable shoe on the market today. Bont’s resin is developed in house and has been perfected over 36 years to be an extremely stiff resin that becomes pliable at relatively low temperatures. The base of the shoe is moldable which means all stiff areas of the shoe can be molded in a standard oven. To mold your shoes, remove any cleats, laces or cleat mounting screws and innersole before molding. Failure to remove the innersole can result in it becoming deformed by the heat. Pre heat the oven to 70°C. Place the shoe in the oven for 20 minutes. Higher temperatures will void your warranty and may damage your boot. Caution: Do not place your feet in the hot shoes or you may burn your feet. Let them cool a little and test the shoe temperature with your hand before placing your feet in the shoes. Tighten the straps and allow to cool. If you have any lumps or bunions on your feet or if there are any areas causing discomfort, while the shoe is hot you can use the round end of a screwdriver to press out any part of the boot. You can heat mold the shoes as many times as you like.

  • Carbon Composite Construction with Microfiber Upper.
  • Stack height: 4.8mm.
  • Air Vents: ventilations holes through upper and mesh inserts.
  • Innersole: EVA thermo-moldable
  • Sole Guards: replaceable.
  • Padding: memory foam.
  • Fit customisation: fully heat moldable chassis.
  • Cleat Mounting: 3 Hole Look Configuration.
  • Closure System: independent Double Velcro Closure.
  • Weight: 230 grams.

  • Ordered before 15:00? We ship from the Netherlands TODAY.
  • Delivery time between 1-7 working days. 
  • Over €100? We ship throughout whole Europe for FREE. 
  • We provide you with tracking service. 
  • Consideration time is 30 days. We just send you the money back. 

To choose the right size, please go to the Choose your size page.

You have irregular feet? Try and have a look at the Custom Made Page.

First of all, you do not need to mold your shoes if they fit you straight out of the box!
This cycling shoe is the most heat moldable shoe on the market today. Bont’s resin is developed in house and has been perfected over 36 years to be an extremely stiff resin that becomes pliable at relatively low temperatures. The base of the shoe is moldable which means all stiff areas of the shoe can be molded in a standard oven. To mold your shoes, remove any cleats, laces or cleat mounting screws and innersole before molding. Failure to remove the innersole can result in it becoming deformed by the heat. Pre heat the oven to 70°C. Place the shoe in the oven for 20 minutes. Higher temperatures will void your warranty and may damage your boot. Caution: Do not place your feet in the hot shoes or you may burn your feet. Let them cool a little and test the shoe temperature with your hand before placing your feet in the shoes. Tighten the straps and allow to cool. If you have any lumps or bunions on your feet or if there are any areas causing discomfort, while the shoe is hot you can use the round end of a screwdriver to press out any part of the boot. You can heat mold the shoes as many times as you like.

Why choose Reins.cc?

  • Ordered before 15:00 = shipped today from the Netherlands.
  • Always 100% satisfaction guarantee
  • Pay safe with Credit Card and many other European payment options.
  • Service from experts, which are always there for you.
  • 30 days consideration time for cash back.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

our store

Not around the corner? We bring the physical shop experience online!