Skip to content
BLACK FRIDAY
BLACK FRIDAY
Semi-custom | Zero+

Semi-custom | Zero+

Save 8%
€599,00
€549,00

Free Shipping (from €100,-)!
30 days consideration time
Advice frome experts

Notify me when back in stock

If you want to improve your performance on time-trials and triathlons - don’t look further!

The Zero+ is the fastest shoe within the Bont Cycling range.

It is therefore not a surprise that top athletes such as Jan Frodeno (Ironman World Champion) have been breaking records with the Zero+ for many years now.

This shoe simply does not leave any watt wasted thanks to its unique aerodynamic covering and a centrally located BOA dial.

Important fact is that the anatomical design is backed by more than 20.000 foot scans and constructed using materials such as 100% carbon to make sure these shoes can be used for many years.

Once you step inside these shoes you will know what this is all about. And the best part is that they will be as stiff, light and strong from the first ride to the last one.

Why you might need a semi-custom pair:

  • One feet is longer than the other.
  • Irragular feet.
  • Difference left/right feet.
  • You want Speedplay soles.
  • You like to have your own design.

What you can customize:

  • Colors and design
  • Name embroidery
  • BOA colors

2 ways to get your semi-custom pair:

  • Place an order and the team will be in touch to confirm your specific requirements and proceed with the measurements.
  • Contact us for any modifications to sizing including left-right shoes and unique width requests or other questions.

Delivery time 6 weeks

Advantages:

  • Cycling without pain: you will no longer be irritated while you are supposed to be enjoying cycling.
  • Pull & push efficiently: move your legs, feet and shoes efficiently, as one unit.
  • All energy in one carbon chassis: this shoe is made out of one entire carbon chassis, which divides the energy all over your feet.
  • Extremely light shoes: with Durolite upper and faux suede leather inside.
  • Fully heat moldable: if needed, you can customise your fit by heat molding your shoe.

  • Unidirectional 100% Carbon Chassis.
  • Stack height: 3.6mm.
  • Air Vents: frontal area air vents and air grills in arch area.
  • Innersole: EVA thermo-moldable.
  • Sole Guards: replaceable.
  • Padding: memory foam.
  • Fit customisation: fully heat moldable chassis.
  • Cleat Mounting: MM grid plus grip / 3 Hole Look Configuration.
  • Closure System: dual Dial Retention System with Kevlar wiring.
  • Weight: 230 grams.
  • Semi and Full Custom available through custom programm.
  • BOA Li2 dial with  The Boa Guarantee, for the life of your shoes.

  • After placing the order or contacting us regarding your semi-custom request, a Bont specialist from the Reins.cc team will contact you.
  • Production lead times are currently 7-8 weeks following confirmation of selections. Please allow additional time for delivery to your chosen address.
  • Reins.cc prioritizes DPD for shipping across Europe. Although it may use a local carrier if appropriate.
  • We provide a track & trace number for you.

To choose the right size, please go to the Choose your Size page.

You have irregular feet? Try and have a look at the Custom Made Page.

First of all, you do not need to mold your shoes if they fit you straight out of the box!
This cycling shoe is the most heat moldable shoe on the market today. Bont’s resin is developed in house and has been perfected over 36 years to be an extremely stiff resin that becomes pliable at relatively low temperatures. The base of the shoe is moldable which means all stiff areas of the shoe can be molded in a standard oven. To mold your shoes, remove any cleats, laces or cleat mounting screws and innersole before molding. Failure to remove the innersole can result in it becoming deformed by the heat. Pre heat the oven to 70°C. Place the shoe in the oven for 20 minutes. Higher temperatures will void your warranty and may damage your boot. Caution: Do not place your feet in the hot shoes or you may burn your feet. Let them cool a little and test the shoe temperature with your hand before placing your feet in the shoes. Tighten the straps and allow to cool. If you have any lumps or bunions on your feet or if there are any areas causing discomfort, while the shoe is hot you can use the round end of a screwdriver to press out any part of the boot. You can heat mold the shoes as many times as you like.

  • Unidirectional 100% Carbon Chassis.
  • Stack height: 3.6mm.
  • Air Vents: frontal area air vents and air grills in arch area.
  • Innersole: EVA thermo-moldable.
  • Sole Guards: replaceable.
  • Padding: memory foam.
  • Fit customisation: fully heat moldable chassis.
  • Cleat Mounting: MM grid plus grip / 3 Hole Look Configuration.
  • Closure System: dual Dial Retention System with Kevlar wiring.
  • Weight: 230 grams.
  • Semi and Full Custom available through custom programm.
  • BOA Li2 dial with  The Boa Guarantee, for the life of your shoes.

  • After placing the order or contacting us regarding your semi-custom request, a Bont specialist from the Reins.cc team will contact you.
  • Production lead times are currently 7-8 weeks following confirmation of selections. Please allow additional time for delivery to your chosen address.
  • Reins.cc prioritizes DPD for shipping across Europe. Although it may use a local carrier if appropriate.
  • We provide a track & trace number for you.

To choose the right size, please go to the Choose your Size page.

You have irregular feet? Try and have a look at the Custom Made Page.

First of all, you do not need to mold your shoes if they fit you straight out of the box!
This cycling shoe is the most heat moldable shoe on the market today. Bont’s resin is developed in house and has been perfected over 36 years to be an extremely stiff resin that becomes pliable at relatively low temperatures. The base of the shoe is moldable which means all stiff areas of the shoe can be molded in a standard oven. To mold your shoes, remove any cleats, laces or cleat mounting screws and innersole before molding. Failure to remove the innersole can result in it becoming deformed by the heat. Pre heat the oven to 70°C. Place the shoe in the oven for 20 minutes. Higher temperatures will void your warranty and may damage your boot. Caution: Do not place your feet in the hot shoes or you may burn your feet. Let them cool a little and test the shoe temperature with your hand before placing your feet in the shoes. Tighten the straps and allow to cool. If you have any lumps or bunions on your feet or if there are any areas causing discomfort, while the shoe is hot you can use the round end of a screwdriver to press out any part of the boot. You can heat mold the shoes as many times as you like.

Why choose Reins.cc?

  • Ordered before 15:00 = shipped today from the Netherlands.
  • Always 100% satisfaction guarantee
  • Pay safe with Credit Card and many other European payment options.
  • Service from experts, which are always there for you.
  • 30 days consideration time for cash back.

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
G
Gogoli

Just a perfect shoe! No heat molding necessary. I am very happy with it!

P
Paweł Bellwon

Beautiful product! Very well made and unique!

our store

Not around the corner? We bring the physical shop experience online!