Zu Inhalt springen
€100 = KOSTENLOSER VERSAND
€100 = KOSTENLOSER VERSAND
Full custom | Vaypor + Li2

Full custom | Vaypor + Li2

Sparen Sie 12 %
€1.199,00
€1.050,00

Kostenloser Versand (ab €100,-)!
30 Tage Bedenkzeit
Ratschläge von Experten

Benachrichtigen Sie mich, wenn der Artikel wieder verfügbar ist

Der Vaypor+ mit Känguru-Leder ist die Krönung der Bont Cycling Reihe und bringt Leistung und Luxus auf ein neues Niveau.

Der brandneue Vaypor + Li2 wurde entwickelt, um Fahrt für Fahrt deine beste Leistung zu liefern. Er hat mehr als nur ein Facelifting mit dem neuesten BOA® Li2 Fit System erhalten, das eine noch präzisere, sichere und mikroverstellbare Passform bietet. Konstruktionsmethodenvon Vaypor+ entworfen und kombiniert klassische Materialien mit modernster Umsetzung.

Für alle, die das Beste aus ihrem Körper und ihrer Ausrüstung und dabei immer gut aussehen wollen, ist der Vaypor+ genau das Richtige für dich.

Warum benötigst du möglicherweise ein Full-Custom-Paar:

  • Ein Fuß ist länger als der andere.
  • Breite Füße.
  • Unregelmäßige Füße.
  • You suffer from hammer and/or claw toes.
  • Unterschied linker/rechter Fuß.
  • Sie haben gerne Ihr eigenes Design.

Was du anpassen könntest:

  • Farben und Design
  • Namensstickerei
  • BOA-Farben

2 ways to get your full-custom pair:

  • Eine Bestellung aufgeben and the team will be in touch to confirm your specific requirements and proceed with the full customization.
  • Kontaktiere uns for any questions and requirements in order to proceed to full customization.

Advantages:

  • Radfahren ohne Schmerzen: die anatomische Perfektion des Leistens von Bont Cycling sorgt für den richtigen Sitz.
  • Geh näher an der Pedalachse: deine Füße arbeiten viel näher an der Pedalachse, was deine Leistung deutlich erhöht.
  • Effizientes Pedalieren: die Energie wird über den ganzen Fuß verteilt.
  • Extrem robuste Materialien: mit der luxuriösen und doch kompromisslosen Stärke eines Obermaterials aus Känguruleder .
  • Vollständig hitzeverformbar: bei Bedarf kannst du deine Passform durch Hitzeverformung des Schuhs anpassen.

  • 100% carbon unidirectional monocoque chassis with Kangaroo Leather upper and leather lining.
  • Stack height: 3.6mm.
  • Air Vents: ventilation via air vents on front bumper and perforated upper
  • Innersole: EVA thermo-moldable. li>
  • Sole Guards: Replaceable.
  • Padding: memory foam.
  • Fit customisation: fully heat moldable chassis.
  • Cleat Mounting: standard 3-hole road pedal configuration with alignment grid and grip. Also available with 4-hole Speedplay sole on request.
  • Weight: 250 grams.
  • Semi and Full Custom available through custom programm.
  • BOA Li2 dial with  The Boa Guarantee, for the life of your shoes.

  • After placing the order or contacting us regarding your full-custom request, a Bont specialist from the Reins.cc team will contact you in order to plan the customization.
  • Production lead times are currently 7-8 weeks following confirmation of selections. Please allow additional time for delivery to your chosen address.
  • Reins.cc prioritizes DPD for shipping across Europe. Although it may use a local carrier if appropriate.
  • We provide a track & trace number for you.

First of all, you do not need to mold your shoes if they fit you straight out of the box!
This cycling shoe is the most heat moldable shoe on the market today. Bont’s resin is developed in house and has been perfected over 36 years to be an extremely stiff resin that becomes pliable at relatively low temperatures. The base of the shoe is moldable which means all stiff areas of the shoe can be molded in a standard oven. To mold your shoes, remove any cleats, laces or cleat mounting screws and innersole before molding. Failure to remove the innersole can result in it becoming deformed by the heat. Pre heat the oven to 70°C. Place the shoe in the oven for 20 minutes. Higher temperatures will void your warranty and may damage your boot. Caution: Do not place your feet in the hot shoes or you may burn your feet. Let them cool a little and test the shoe temperature with your hand before placing your feet in the shoes. Tighten the straps and allow to cool. If you have any lumps or bunions on your feet or if there are any areas causing discomfort, while the shoe is hot you can use the round end of a screwdriver to press out any part of the boot. You can heat mold the shoes as many times as you like.

  • 100% carbon unidirectional monocoque chassis with Kangaroo Leather upper and leather lining.
  • Stack height: 3.6mm.
  • Air Vents: ventilation via air vents on front bumper and perforated upper
  • Innersole: EVA thermo-moldable. li>
  • Sole Guards: Replaceable.
  • Padding: memory foam.
  • Fit customisation: fully heat moldable chassis.
  • Cleat Mounting: standard 3-hole road pedal configuration with alignment grid and grip. Also available with 4-hole Speedplay sole on request.
  • Weight: 250 grams.
  • Semi and Full Custom available through custom programm.
  • BOA Li2 dial with  The Boa Guarantee, for the life of your shoes.

  • After placing the order or contacting us regarding your full-custom request, a Bont specialist from the Reins.cc team will contact you in order to plan the customization.
  • Production lead times are currently 7-8 weeks following confirmation of selections. Please allow additional time for delivery to your chosen address.
  • Reins.cc prioritizes DPD for shipping across Europe. Although it may use a local carrier if appropriate.
  • We provide a track & trace number for you.

First of all, you do not need to mold your shoes if they fit you straight out of the box!
This cycling shoe is the most heat moldable shoe on the market today. Bont’s resin is developed in house and has been perfected over 36 years to be an extremely stiff resin that becomes pliable at relatively low temperatures. The base of the shoe is moldable which means all stiff areas of the shoe can be molded in a standard oven. To mold your shoes, remove any cleats, laces or cleat mounting screws and innersole before molding. Failure to remove the innersole can result in it becoming deformed by the heat. Pre heat the oven to 70°C. Place the shoe in the oven for 20 minutes. Higher temperatures will void your warranty and may damage your boot. Caution: Do not place your feet in the hot shoes or you may burn your feet. Let them cool a little and test the shoe temperature with your hand before placing your feet in the shoes. Tighten the straps and allow to cool. If you have any lumps or bunions on your feet or if there are any areas causing discomfort, while the shoe is hot you can use the round end of a screwdriver to press out any part of the boot. You can heat mold the shoes as many times as you like.

Why choose Reins.cc?

  • Ordered before 15:00 = shipped today from the Netherlands.
  • Always 100% satisfaction guarantee
  • Pay safe with Credit Card and many other European payment options.
  • Service from experts, which are always there for you.
  • 30 days consideration time for cash back.

Unser Shop

Nicht um die Ecke? Wir bringen das physische Einkaufserlebnis online!