Zu Inhalt springen
€100 = KOSTENLOSER VERSAND
€100 = KOSTENLOSER VERSAND
Full custom | Helix

Full custom | Helix

Sparen Sie 12 %
€1.199,00
€1.050,00

Kostenloser Versand (ab €100,-)!
30 Tage Bedenkzeit
Ratschläge von Experten

Benachrichtigen Sie mich, wenn der Artikel wieder verfügbar ist

Our Full Custom program uses cycling-specific foot castings supplied by you (or by us if an appointment is possible) to build a pair of shoes constructed exactly to the shape of your feet.

The new gold standard in performance footwear, the Bont Cycling Helix features our race-proven anatomic fit with a reimagined BOA closure system.

You think you’re close to the pedal spindle in your current shoes? The Bont Cycling Helix will get you closer. Experience performance and comfort without compromise like never before.

Why you might need a full-custom pair:

  • One feet is longer than the other.
  • Wide feet.
  • Irragular feet.
  • You suffer from hammer and/or claw toes.
  • Difference left/right feet.
  • You like to have your own design.

What you can customize:

  • Colors and design
  • Name embroidery
  • BOA colors

2 ways to get your full-custom pair:

  • Place an order and the team will be in touch to confirm your specific requirements and proceed with the full customization.
  • Contact us for any questions and requirements in order to proceed to full customization.

Overall production and delivery time is 3 months.

Advantages:

  • Cycling without pain: you will no longer be irritated while you are supposed to be enjoying cycling.
  • Get closer to your pedal spindle: your feet will work much closer to your pedal spindle, which will increase your performance significantly.
  • Pedaling efficiently: this shoe is made out of one entire carbon chassis, which devides the energy all over your feet.
  • Extremely light shoes: with Durolite upper and faux suede leather inside.
  • 100% customized: you will have customized shoes fully shaped around your feet.

  • Weight: 230gr (size 42)
  • 100% carbon fiber construction utilising hand-laid unidirectional carbon from Toray of Japan and Bont Cycling’s proprietary heat molding technology.
  • Industry-leading 3.6mm stack height (sole thickness) for a closer connection to the pedal, more rounded pedal strokes, improved stability and injury prevention.
  • Durolite upper supported by an embedded anti-stretch fabric for a consistent fit across the lifetime of the shoes.
  • Comfortable faux suede liner with lightweight padding.
  • Frontal Air Vents for breathability in all-weather conditions.
  • Innersole: EVA thermo-moldable with built-in inner padding.
  • Sole Replaceable heel and toe guards.
  • 316 marine grade stainless steel hardware for improved removal and replacement of cleat t-nuts and heel pads.
  • Cleat Mounting: standard 3-hole road pedal configuration with alignment grid and grip. Also available with 4-hole Speedplay sole on request.
  • Semi and Full Custom available through custom programm.
  • BOA Li2 dial with  The Boa Guarantee, for the life of your shoes.

  • After placing the order or contacting us regarding your semi-custom request, a Bont specialist from the Reins.cc team will contact you.
    Production lead times are currently 8-9 weeks following confirmation of selections. Please allow additional time for delivery to your chosen address.
    Reins.cc prioritizes DPD for shipping across Europe. Although it may use a local carrier if appropriate.
    We provide a track & trace number for you.

First of all, you do not need to mold your shoes if they fit you straight out of the box!
This cycling shoe is the most heat moldable shoe on the market today. Bont’s resin is developed in house and has been perfected over 36 years to be an extremely stiff resin that becomes pliable at relatively low temperatures. The base of the shoe is moldable which means all stiff areas of the shoe can be molded in a standard oven. To mold your shoes, remove any cleats, laces or cleat mounting screws and innersole before molding. Failure to remove the innersole can result in it becoming deformed by the heat. Pre heat the oven to 70°C. Place the shoe in the oven for 20 minutes. Higher temperatures will void your warranty and may damage your boot. Caution: Do not place your feet in the hot shoes or you may burn your feet. Let them cool a little and test the shoe temperature with your hand before placing your feet in the shoes. Tighten the straps and allow to cool. If you have any lumps or bunions on your feet or if there are any areas causing discomfort, while the shoe is hot you can use the round end of a screwdriver to press out any part of the boot. You can heat mold the shoes as many times as you like.

  • Weight: 230gr (size 42)
  • 100% carbon fiber construction utilising hand-laid unidirectional carbon from Toray of Japan and Bont Cycling’s proprietary heat molding technology.
  • Industry-leading 3.6mm stack height (sole thickness) for a closer connection to the pedal, more rounded pedal strokes, improved stability and injury prevention.
  • Durolite upper supported by an embedded anti-stretch fabric for a consistent fit across the lifetime of the shoes.
  • Comfortable faux suede liner with lightweight padding.
  • Frontal Air Vents for breathability in all-weather conditions.
  • Innersole: EVA thermo-moldable with built-in inner padding.
  • Sole Replaceable heel and toe guards.
  • 316 marine grade stainless steel hardware for improved removal and replacement of cleat t-nuts and heel pads.
  • Cleat Mounting: standard 3-hole road pedal configuration with alignment grid and grip. Also available with 4-hole Speedplay sole on request.
  • Semi and Full Custom available through custom programm.
  • BOA Li2 dial with  The Boa Guarantee, for the life of your shoes.

  • After placing the order or contacting us regarding your semi-custom request, a Bont specialist from the Reins.cc team will contact you.
    Production lead times are currently 8-9 weeks following confirmation of selections. Please allow additional time for delivery to your chosen address.
    Reins.cc prioritizes DPD for shipping across Europe. Although it may use a local carrier if appropriate.
    We provide a track & trace number for you.

First of all, you do not need to mold your shoes if they fit you straight out of the box!
This cycling shoe is the most heat moldable shoe on the market today. Bont’s resin is developed in house and has been perfected over 36 years to be an extremely stiff resin that becomes pliable at relatively low temperatures. The base of the shoe is moldable which means all stiff areas of the shoe can be molded in a standard oven. To mold your shoes, remove any cleats, laces or cleat mounting screws and innersole before molding. Failure to remove the innersole can result in it becoming deformed by the heat. Pre heat the oven to 70°C. Place the shoe in the oven for 20 minutes. Higher temperatures will void your warranty and may damage your boot. Caution: Do not place your feet in the hot shoes or you may burn your feet. Let them cool a little and test the shoe temperature with your hand before placing your feet in the shoes. Tighten the straps and allow to cool. If you have any lumps or bunions on your feet or if there are any areas causing discomfort, while the shoe is hot you can use the round end of a screwdriver to press out any part of the boot. You can heat mold the shoes as many times as you like.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Unser Shop

Nicht um die Ecke? Wir bringen das physische Einkaufserlebnis online!